Lmfte License Server Error Please Try Again

Error half-dozen

Problem: License library initialization failed with error: Activation Library Initialization mistake #half dozen. Please, contact software vendor to resolve the problem.

Reason: Tekla license server installation folder contains .dll files that are from the previous Tekla license server version.

Solution: To resolve the problem, practice the following:

Close Tekla License Administration Tool and finish the Tekla license server in LMTOOLS past clicking Stop Server on the Kickoff/Terminate/Reread tab.
Uninstall all existing Tekla license server installations.
If the Tekla license server installation folder contains whatever .dll files, remove the files manually.
Now y'all can install Tekla license server to the same folder where the uninstalled version was.

For more information near license server installation, see Installing Tekla license server.

Notation:

Deactivation is non needed in this example. Licenses are kept rubber in a specific Flexera Software location outside Tekla license server installation directory.

Fault 20

Problem: Error twenty: The licensing service is not installed.

Reason: The mistake occurs when you are starting Tekla License Administration Tool, or when you are trying to run serveractutil.exe command line tool.

Solution: If you selected the Manual option for Tekla Licensing Service installation then yous demand to manually install FLEXnet licensing service:

If you have some other FlexNet licensing service running on the server, end information technology earlier entering the commands.
Go to the Kickoff menu or Start screen, depending on your Windows operating system, and open Control Prompt as an administrator.
At the control prompt, type the following commands:

cd /D full_path_to_installation_directory

For example, if y'all install Tekla license server to the default binder, yous demand to enter cd /D C:\Tekla\License\Server.

installanchorservice.exe

Fault 109

Problem: At that place are no activated licenses to render. Another program may accept modified the activated licenses rights concurrently. (109) Unable to return as there is no licenses in Trusted Storage.

Reason: The trusted storage has been modified, probably by some other program.

The ruddy Restore (R) trust status of your license is non trusted. The license is broken, therefore it cannot exist returned.

Solution: The license will go bachelor on the server machine automatically when the borrow period ends.

Error 123 or error 50030

Problem: Message 1: Row n: An error occurred but FLEXnet Licensing did not return an error number. (123)

Bulletin 2: Failed to load trusted storage or specified ASR. (50030)

Reason: These error messages indicate that the trusted storage cannot be loaded, and your trusted storage is corrupted.

Solution: Your licenses need to exist replaced. Contact your local Tekla representative for a replacement along with some instructions.

Mistake 1316

Trouble: License server installation fails.

The following message is displayed: "A network error occurred while attempting to read from the file C:\Documents and Settings\<user>\Local Settings\Application Data\Downloaded Installations\...\Tekla Structures License Server v1.01.msi".

Reason: Y'all have an older version of the license server installed.

Solution: Uninstall the old version and so install the new version of the license server.

For more than information about uninstalling the server, come across Uninstall Tekla Structures.

Error 7174

License activation fails, and the following message is displayed: "Unspecified FLEXnet Error with code 7174 Merely deployed entitlement line particular tin can be fulfilled."

Reason: Y'all are trying to activate an obsolete license.

Solution: You should have received a new entitlement certificate from your local Tekla representative. Try the activation again with the new entitlement certificate, and move the old obsolete entitlement certificate in an archive binder.

For more information, see Actuate on-premises licenses.

Error 7284

Problem: Unspecified FLEXnet Error with code 7284. Cannot perform support actions on inactive fulfillment record FID_xxxxxxxx_xxxxxxxxxxx__xxxx.

Reason: Trusted Storage has been restored from an former fill-in re-create. The license with fulfillment ID FID_ xxxxxxxx_xxxxxxxxxxx__xxxx has been deactivated already.

Solution: You need to restore trusted storage files from the about recent backup re-create and then repair licenses if needed.

For more information about repairing licenses, encounter Repair an on-premises license.

Fault 7288 and fault 111

Message 1: The activation of the fulfillment is denied by the activation policy considering fulfill count exceeded the available seat count.

Message 2: The activation of the fulfillment is denied past the activation policy because number of copies left is zero.

Reason 1: Yous may exist trying to activate some licenses that have been activated earlier on another server/computer.

Solution: Conciliate the licenses from the other computer, and and so activate the licenses on the new server/computer.

Reason ii: You may exist trying to activate a renewed temporary license or permanent licenses without deactivating the previous linked activated licenses.

Solution: Deactivate the existing temporary licenses first and then activate the succeeding linked licenses.

For more information almost deactivating licenses, meet Conciliate on-bounds licenses.

Error 7343

Problem: Unspecified FLEXnet Error with code 7343 Entitlement line item has expired on <date> <fourth dimension>.

Reason: License has expired. It is not possible to activate or repair expired licenses.

Error 7466

Problem: License deactivation fails, and the following message is displayed: "The return of the fulfillment is denied by the render policy considering max render exceeded".

Reason: You take deactivated the license too many times in a xxx days flow.

Solution: You lot can conciliate the license once again when 30 days accept passed since the first deactivation of the license in the past xxx days. The number of deactivations of a license within a given time catamenia is express due to technical and security reasons.

Fault 7581

Problem: Unspecified FLEXnet Fault with code 7581. Online Return/Repair Request for the activationId XXXX-XXXX-XXXX-XXXX-XXXX-20 is not originated from the original client machine.

Reason and solution: The computer is non the same where the licenses were originally activated, and you demand to render/repair licenses from the original computer. Another reason might exist that the computer has changed so much that activation server at Trimble Solutions no longer recognizes information technology as the same 1, in which case you need to supersede your licenses.

For more information almost returning and repairing licenses, run across Render a borrowed on-premises license and Repair an on-premises license.

Mistake 9999

Trouble, reason and solution:: Licensing server at Trimble Solutions is down. Expect for a while and retry.

Mistake 50005

Trouble: Mistake (5005) License Activation failed - Initialization of API Failed.

Problem: The activated licenses are not visible and it is not possible to activate new licenses.

Reason: The installation parcel has failed to initialize or register some of the software components.

Solution: Practise the following:

Log in with administrator's rights.
Close Tekla License Administration Tool.
End Tekla license server and other license servers on the same reckoner on the tab.
Go to ..\Tekla\License\Server folder.
Double-click installanchorservice.exe.
Start Tekla license server and other license servers on the same computer on the tab.
Open Tekla License Administration Tool. The message should not be displayed anymore.

Error 50018

Problem: License borrowing fails.

Reason: Wrong production ID file is used.

Solution: Exercise one of the following:

Export a product ID file in Tekla License Administration Tool and use the file for borrowing.

Error 50033

Problem: License borrowing fails.

Reason i: Your license server may not have upwards-to-appointment license data.

Solution: In LMTOOLS, stop and and then restart the server.

Reason 2: The INCLUDE keyword in the options file prevents the borrowing of the configuration.

Solution: Yous need to add a dummy user "ACTIVATED LICENSE(Due south)" into the group of the included users to enable the borrowing. Do the following:

Open tekla.opt using a text editor.
Add "ACTIVATED LICENSE(S)" in the grouping of the included users, for example:

Group steel "ACTIVATED LICENSE(S)" user1 user2 user3 user4

INCLUDE STD-C Group steel
Save the changes you made in tekla.opt.
In LMTOOLS, reread the license file or finish the server and and so start the server.

Error 50035

Problem: License borrowing fails.

Reason: The user tried to borrow a license that is non activated on the license server. For instance, the user tried to infringe a version 20 license and there are only version 21 licenses activated on the server.

Solution: Practice the following:

Cheque that the product ID file is up to date. If not, consign a new product ID file in Tekla License Administration Tool () and send this file to the user for borrowing. Then ask the user to salvage the new product ID file, open the Tekla License Borrow Tool, click Open and browse for the new .tpi file and try borrowing again.
Cheque that your license data is upwards to engagement in LMTOOLS. If not, reread the license file.

Error 50036

Trouble: License borrowing fails.

Reason: Yous are non immune to infringe the license.

Solution: Do one of the following:

The options file (tekla.opt) needs to be modified and so that the borrowing of the license is allowed. For more than information, encounter Alter on-bounds license access rights (tekla.opt).
Borrow some other license.

Mistake 50037

Problem: License returning fails.

Reason: You tried to return the license to a different license server than it was borrowed from.

Solution: Yous need to return the license to the aforementioned license server that information technology was borrowed from. Exercise the following:

Go to through the Get-go menu or Get-go screen, depending on your Windows operating system.
Click Setup and enter the name of the license server where you originally borrowed the license from and click OK.
Select the Return cheque box in the Borrowed Licenses area to select the license for returning.
Click the Return push to return the license.

Later successful returning of licenses, the Borrowed Licenses area is updated.

Fault 50040 or error 50041

Error 50040 or error 50041, trouble 1: License activation, deactivation or repairing fails

Reason: Your license server was not able to connect to activation server at Trimble Solutions correctly. Usually this is a temporary problem in online activation.

Solution: Practise the following:

Cheque that your Internet connexion is working. An Internet connection is needed during license activation and deactivation. A low connection speed may as well cause errors.
Close Tekla License Administration Tool and attempt to activate the license a while later.
Try to activate another license.
Your firewall may cake the activation communication. Check your firewall settings. For more than data, meet Assuasive Tekla license server to operate through Windows Firewall.
Check that you take the latest Tekla license server version.
This fault could be acquired past unfinalized Windows updates on the server calculator. Reboot the server and endeavour again.
Your Windows login user name may contain special characters. Attempt to log in with another user name, for example, administrator.
Cheque that your Internet connection is working.
Contact your local Tekla Structures support and ask for a manual activation.

Fault 50040 or error 50041, problem 2: License borrowing fails.

Reason: You are not connected to the license server.

Solution: Practise the post-obit:

Check that your network connexion is working.
Start Tekla License Borrow Tool and check that you have entered the correct license server information.

sealsturat1947.blogspot.com

Source: https://support.tekla.com/doc/tekla-structures/2021/lic_problems_with_tekla_structures_licensing_error_messages_with_error_codes